Plates and sheets - Cold rolled
Below, you will find the tolerances for plates an sheets, according to alloy group.
According to EN 485-4:2000
Alloy Group 1:EN AW-1050A/EN AW-3003/EN AW-5005
| Thickness | Width range | Tolerance | |||
|---|---|---|---|---|---|
| Min | Min | mm | Tolerance Type | ||
| 0.2 | 0.4 | 0 | 1000 | 0.02 | +/- |
| 0.2 | 0.4 | 1000 | 1250 | 0.04 | +/- |
| 0.2 | 0.4 | 1250 | 1600 | 0.05 | +/- |
| 0.4 | 0.5 | 0 | 1000 | 0.03 | +/- |
| 0.4 | 0.5 | 1000 | 1250 | 0.04 | +/- |
| 0.4 | 0.5 | 1250 | 1600 | 0.05 | +/- |
| 0.4 | 0.5 | 1600 | 2000 | 0.06 | +/- |
| 0.4 | 0.5 | 2000 | 2500 | 0.1 | +/- |
| 0.5 | 0.6 | 0 | 1000 | 0.03 | +/- |
| 0.5 | 0.6 | 1000 | 1250 | 0.05 | +/- |
| 0.5 | 0.6 | 1250 | 1600 | 0.06 | +/- |
| 0.5 | 0.6 | 1600 | 2000 | 0.07 | +/- |
| 0.5 | 0.6 | 2000 | 2500 | 0.11 | +/- |
| 0.6 | 0.8 | 0 | 1000 | 0.03 | +/- |
| 0.6 | 0.8 | 1000 | 1250 | 0.06 | +/- |
| 0.6 | 0.8 | 1250 | 1600 | 0.07 | +/- |
| 0.6 | 0.8 | 1600 | 2000 | 0.08 | +/- |
| 0.6 | 0.8 | 2000 | 2500 | 0.12 | +/- |
| 0.8 | 1 | 0 | 1000 | 0.04 | +/- |
| 0.8 | 1 | 1000 | 1250 | 0.06 | +/- |
| 0.8 | 1 | 1250 | 1600 | 0.08 | +/- |
| 0.8 | 1 | 1250 | 1600 | 0.09 | +/- |
| 0.8 | 1 | 1600 | 2000 | 0.09 | +/- |
| 0.8 | 1 | 2000 | 2500 | 0.13 | +/- |
| 1 | 1.2 | 0 | 1000 | 0.04 | +/- |
| 1 | 1.2 | 1000 | 1250 | 0.07 | +/- |
| 1 | 1.2 | 1250 | 1600 | 0.09 | +/- |
| 1 | 1.2 | 1600 | 2000 | 0.1 | +/- |
| 1 | 1.2 | 2000 | 2500 | 0.14 | +/- |
| 1.2 | 1.5 | 0 | 1000 | 0.05 | +/- |
| 1.2 | 1.5 | 1000 | 1250 | 0.09 | +/- |
| 1.2 | 1.5 | 1250 | 1600 | 0.1 | +/- |
| 1.2 | 1.5 | 1600 | 2000 | 0.11 | +/- |
| 1.2 | 1.5 | 2000 | 2500 | 0.16 | +/- |
| 1.5 | 1.8 | 0 | 1000 | 0.06 | +/- |
| 1.5 | 1.8 | 1000 | 1250 | 0.1 | +/- |
| 1.5 | 1.8 | 1250 | 1600 | 0.11 | +/- |
| 1.5 | 1.8 | 1600 | 2000 | 0.12 | +/- |
| 1.5 | 1.8 | 2000 | 2500 | 0.17 | +/- |
| 1.8 | 2 | 0 | 1000 | 0.06 | +/- |
| 1.8 | 2 | 1000 | 1250 | 0.11 | +/- |
| 1.8 | 2 | 1250 | 1600 | 0.12 | +/- |
| 1.8 | 2 | 1600 | 2000 | 0.14 | +/- |
| 1.8 | 2 | 2000 | 2500 | 0.19 | +/- |
| 2 | 2.5 | 0 | 1000 | 0.07 | +/- |
| 2 | 2.5 | 1000 | 1250 | 0.12 | +/- |
| 2 | 2.5 | 1250 | 1600 | 0.13 | +/- |
| 2 | 2.5 | 1600 | 2000 | 0.15 | +/- |
| 2 | 2.5 | 2000 | 2500 | 0.2 | +/- |
| 2.5 | 3 | 0 | 1000 | 0.08 | +/- |
| 2.5 | 3 | 1000 | 1250 | 0.13 | +/- |
| 2.5 | 3 | 1250 | 1600 | 0.15 | +/- |
| 2.5 | 3 | 1600 | 2000 | 0.17 | +/- |
| 2.5 | 3 | 2000 | 2500 | 0.23 | +/- |
| 3 | 3.5 | 0 | 1000 | 0.1 | +/- |
| 3 | 3.5 | 1000 | 1250 | 0.15 | +/- |
| 3 | 3.5 | 1250 | 1600 | 0.17 | +/- |
| 3 | 3.5 | 1600 | 2000 | 0.18 | +/- |
| 3 | 3.5 | 2000 | 2500 | 0.24 | +/- |
| 3.5 | 4 | 0 | 1000 | 0.15 | +/- |
| 3.5 | 4 | 1000 | 1250 | 0.2 | +/- |
| 3.5 | 4 | 1250 | 1600 | 0.22 | +/- |
| 3.5 | 4 | 1600 | 2000 | 0.23 | +/- |
| 3.5 | 4 | 2000 | 2500 | 0.25 | +/- |
| 3.5 | 4 | 2500 | 3000 | 0.34 | +/- |
| 3.5 | 4 | 3000 | 3500 | 0.38 | +/- |
| 4 | 5 | 0 | 1000 | 0.18 | +/- |
| 4 | 5 | 1000 | 1250 | 0.22 | +/- |
| 4 | 5 | 1250 | 1600 | 0.24 | +/- |
| 4 | 5 | 1600 | 2000 | 0.25 | +/- |
| 4 | 5 | 2000 | 2500 | 0.29 | +/- |
| 4 | 5 | 2500 | 3000 | 0.36 | +/- |
| 4 | 5 | 3000 | 3500 | 0.42 | +/- |
| 5 | 6 | 0 | 1000 | 0.2 | +/- |
| 5 | 6 | 1000 | 1250 | 0.24 | +/- |
| 5 | 6 | 1250 | 1600 | 0.25 | +/- |
| 5 | 6 | 1600 | 2000 | 0.26 | +/- |
| 5 | 6 | 2000 | 2500 | 0.32 | +/- |
| 5 | 6 | 2500 | 3000 | 0.4 | +/- |
| 5 | 6 | 3000 | 3500 | 0.46 | +/- |
According to EN 485-4:2000
Alloy Group 2:EN AW-5052/ EN AW- 5754/EN AW-5083/EN AW-6082/EN AW-7075
| Thickness | Width range | Tolerance | |||
|---|---|---|---|---|---|
| Min | Min | mm | Tolerance Type | ||
| 0.2 | 0.4 | 0 | 1000 | 0.03 | +/- |
| 0.2 | 0.4 | 1000 | 1250 | 0.05 | +/- |
| 0.2 | 0.4 | 1250 | 1600 | 0.06 | +/- |
| 0.4 | 0.5 | 0 | 1000 | 0.03 | +/- |
| 0.4 | 0.5 | 1000 | 1250 | 0.05 | +/- |
| 0.4 | 0.5 | 1250 | 1600 | 0.06 | +/- |
| 0.4 | 0.5 | 1600 | 2000 | 0.07 | +/- |
| 0.4 | 0.5 | 2000 | 2500 | 0.1 | +/- |
| 0.5 | 0.6 | 0 | 1000 | 0.04 | +/- |
| 0.5 | 0.6 | 1000 | 1250 | 0.06 | +/- |
| 0.5 | 0.6 | 1250 | 1600 | 0.07 | +/- |
| 0.5 | 0.6 | 1600 | 2000 | 0.08 | +/- |
| 0.5 | 0.6 | 2000 | 2500 | 0.11 | +/- |
| 0.6 | 0.8 | 0 | 1000 | 0.04 | +/- |
| 0.6 | 0.8 | 1000 | 1250 | 0.07 | +/- |
| 0.6 | 0.8 | 1250 | 1600 | 0.08 | +/- |
| 0.6 | 0.8 | 1600 | 2000 | 0.09 | +/- |
| 0.6 | 0.8 | 2000 | 2500 | 0.12 | +/- |
| 0.8 | 1 | 0 | 1000 | 0.05 | +/- |
| 0.8 | 1 | 1000 | 1250 | 0.08 | +/- |
| 0.8 | 1 | 1600 | 2000 | 0.1 | +/- |
| 0.8 | 1 | 2000 | 2500 | 0.13 | +/- |
| 1 | 1.2 | 0 | 1000 | 0.05 | +/- |
| 1 | 1.2 | 1000 | 1250 | 0.09 | +/- |
| 1 | 1.2 | 1250 | 1600 | 0.1 | +/- |
| 1 | 1.2 | 1600 | 2000 | 0.12 | +/- |
| 1 | 1.2 | 2000 | 2500 | 0.14 | +/- |
| 1.2 | 1.5 | 0 | 1000 | 0.07 | +/- |
| 1.2 | 1.5 | 1000 | 1250 | 0.11 | +/- |
| 1.2 | 1.5 | 1250 | 1600 | 0.12 | +/- |
| 1.2 | 1.5 | 1600 | 2000 | 0.14 | +/- |
| 1.2 | 1.5 | 2000 | 2500 | 0.16 | +/- |
| 1.5 | 1.8 | 0 | 1000 | 0.08 | +/- |
| 1.5 | 1.8 | 1000 | 1250 | 0.12 | +/- |
| 1.5 | 1.8 | 1250 | 1600 | 0.13 | +/- |
| 1.5 | 1.8 | 1600 | 2000 | 0.15 | +/- |
| 1.5 | 1.8 | 2000 | 2500 | 0.17 | +/- |
| 1.8 | 2 | 0 | 1000 | 0.09 | +/- |
| 1.8 | 2 | 1000 | 1250 | 0.13 | +/- |
| 1.8 | 2 | 1250 | 1600 | 0.14 | +/- |
| 1.8 | 2 | 1600 | 2000 | 0.16 | +/- |
| 1.8 | 2 | 2000 | 2500 | 0.19 | +/- |
| 2 | 2.5 | 0 | 1000 | 0.1 | +/- |
| 2 | 2.5 | 1000 | 1250 | 0.14 | +/- |
| 2 | 2.5 | 1250 | 1600 | 0.15 | +/- |
| 2 | 2.5 | 1600 | 2000 | 0.17 | +/- |
| 2 | 2.5 | 2000 | 2500 | 0.2 | +/- |
| 2.5 | 3 | 0 | 1000 | 0.11 | +/- |
| 2.5 | 3 | 1000 | 1250 | 0.15 | +/- |
| 2.5 | 3 | 1250 | 1600 | 0.17 | +/- |
| 2.5 | 3 | 1600 | 2000 | 0.19 | +/- |
| 2.5 | 3 | 2000 | 2500 | 0.23 | +/- |
| 3 | 3.5 | 0 | 1000 | 0.12 | +/- |
| 3 | 3.5 | 1000 | 1250 | 0.17 | +/- |
| 3 | 3.5 | 1250 | 1600 | 0.19 | +/- |
| 3 | 3.5 | 1600 | 2000 | 0.2 | +/- |
| 3 | 3.5 | 2000 | 2500 | 0.24 | +/- |
| 3.5 | 4 | 0 | 1000 | 0.15 | +/- |
| 3.5 | 4 | 1000 | 1250 | 0.2 | +/- |
| 3.5 | 4 | 1250 | 1600 | 0.22 | +/- |
| 3.5 | 4 | 1600 | 2000 | 0.23 | +/- |
| 3.5 | 4 | 2000 | 2500 | 0.25 | +/- |
| 4 | 5 | 0 | 1000 | 0.18 | +/- |
| 4 | 5 | 1000 | 1250 | 0.22 | +/- |
| 4 | 5 | 1250 | 1600 | 0.24 | +/- |
| 4 | 5 | 1600 | 2000 | 0.25 | +/- |
| 4 | 5 | 2000 | 2500 | 0.29 | +/- |
| 4 | 5 | 2500 | 3000 | 0.36 | +/- |
| 4 | 5 | 3000 | 3500 | 0.42 | +/- |
| 5 | 6 | 0 | 1000 | 0.2 | +/- |
| 5 | 6 | 1000 | 1250 | 0.24 | +/- |
| 5 | 6 | 1250 | 1600 | 0.25 | +/- |
| 5 | 6 | 1600 | 2000 | 0.26 | +/- |
| 5 | 6 | 2000 | 2500 | 0.32 | +/- |
| 5 | 6 | 2500 | 3000 | 0.4 | +/- |
| 5 | 6 | 3000 | 3500 | 0.46 | +/- |