EN AW-5083 1.5 x 1000 x 2000 mm
Material id:
1000181
Thickness
1.5 mm
Width
1000 mm
Length
2000 mm
Temper
H111
Weight
≈ 7.98 kg/pc
CO2e (avg)
≈ 7.0 kg/kg
Stock
Stock material
EN AW-5083
It is sea water resistant and has an average strength, high corrosion resistance and good for welding Medium for anodizing
Â
We are not liable for items out of stock. The specified weight is theoretical. Please contact us if you have any further enquiries.
Technical Specifications
Alloys
| Density | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | g/cm3 | Max | Max | Max | Min | Max | Min | Max | Min | Max | Max | Max | Max | Rest |
| EN AW-5083 | 2.66 | 0.4 | 0.4 | 0.1 | 0.4 | 1 | 4 | 4.9 | 0.05 | 0.25 | 0.25 | 0.15 | 0.15 | Al, Aluminium |
Aluminium Properties
| Thermal conductivity | Coefficient of thermal expansion | Melting point | Elastic modulus | Electrical conductivity | |||
|---|---|---|---|---|---|---|---|
| Alloy | Temper | W/m*K | µm/(m*K) | min °C | KN/mm2 | %IACS | |
| EN AW-5083 | Hx2 | 117 | 23.8 | 580 | 640 | 71 | 28.5 |
| EN AW-5083 | Hx4 | 117 | 23.8 | 580 | 640 | 71 | 28.5 |
| EN AW-5083 | Hx6 | 117 | 23.8 | 580 | 640 | 71 | 28.5 |
| EN AW-5083 | Hx8 | 117 | 23.8 | 580 | 640 | 71 | 28.5 |
| EN AW-5083 | Hx9 | 23.8 | 580 | 640 | 71 | ||
| EN AW-5083 | O | 117 | 23.8 | 580 | 640 | 71 | 28.5 |
Mechanical properties
| Dimension | Tensile strength (Rm) MPa | Proof stress (Rp0,2) | Elongation | Brinell Hardness | Thickness interval | Elongation A50mm | Bend radius 90° | Bend radius 180° | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Norm | Alloy | Temper | Max | Rm N/mm2 | MPa | % min | HBS | mm | % min | t | t | ||
| EN 755-2:2013 | EN AW-5083 | H111 | 200 | 270 | - | 110 | 12 | 70 | - | - | 10 | - | - |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 275 | 350 | 125 | - | 75 | 0.2 | 0.5 | 11 | 0.5 | 1 |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 275 | 350 | 125 | - | 75 | 0.5 | 1.5 | 12 | 1 | 1 |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 275 | 350 | 125 | - | 75 | 1.5 | 3 | 13 | 1 | 1.5 |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 275 | 350 | 125 | - | 75 | 3 | 6.3 | 15 | 1.5 | - |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 270 | 345 | 115 | - | 75 | 6.3 | 12.5 | 16 | 2.5 | - |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 270 | 345 | 115 | 15 | 75 | 12.5 | 50 | - | - | - |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 270 | 345 | 115 | 14 | 73 | 50 | 80 | - | - | - |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 260 | - | 110 | 12 | 70 | 80 | 120 | - | - | - |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 255 | - | 105 | 12 | 69 | 120 | 200 | - | - | - |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 250 | - | 95 | 10 | 69 | 200 | 250 | - | - | - |
| EN 485-2:2008 | EN AW-5083 | H111 | - | 245 | - | 90 | 9 | 69 | 250 | 300 | - | - | - |