EN AW-5005 1.5 x 1500 x 3000 mm
Anodizing Quality 55HXEN AW-5005
It is good for machining and bending and has a high corrosion resistance and good for welding.
The alloy is well suited for decorative anodizing, but the colour may vary.
It is possible to get specific products for high quality facades.
We are not liable for items out of stock. The specified weight is theoretical. Please contact us if you have any further enquiries.
Alloys
Density | Si | Fe | Cu | Mn | Mg | Cr | Zn | Other | |||
---|---|---|---|---|---|---|---|---|---|---|---|
Name | g/cm3 | Max | Max | Max | Max | Min | Max | Max | Max | Max | |
EN AW-5005 | 2.7 | Al, Aluminium | 0.3 | 0.7 | 0.2 | 0.2 | 0.5 | 1.1 | 0.1 | 0.25 | 0.15 |
Aluminium Properties
Thermal conductivity | Coefficient of thermal expansion | Melting point | Elastic modulus | Electrical conductivity | |||
---|---|---|---|---|---|---|---|
Alloy | Temper | W/m*K | µm/(m*K) | min °C | KN/mm2 | %IACS | |
EN AW-5005 | Hx2 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005 | Hx4 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005 | Hx6 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005 | Hx8 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005 | Hx9 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005 | O | 201 | 23.5 | 630 | 655 | 69 | 52 |
Mechanical properties
Tensile strength (Rm) MPa | Proof stress (Rp0,2) | Brinell Hardness | Thickness interval | Elongation A50mm | Bend radius 90° | Bend radius 180° | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Norm | Alloy | Temper | Rm N/mm2 | MPa | HBS | mm | % min | t | t | ||
EN 485-2:2008 | EN AW-5005 | H14 | 145 | 185 | 120 | 48 | 0.2 | 0.5 | 2 | 0.5 | 2 |
EN 485-2:2008 | EN AW-5005 | H14 | 145 | 185 | 120 | 48 | 0.5 | 1.5 | 2 | 1 | 2 |
EN 485-2:2008 | EN AW-5005 | H14 | 145 | 185 | 120 | 48 | 1.5 | 3 | 3 | 1 | 2.5 |
EN 485-2:2008 | EN AW-5005 | H14 | 145 | 185 | 120 | 48 | 3 | 6 | 4 | 2 | - |
EN 485-2:2008 | EN AW-5005 | H14 | 145 | 185 | 120 | 48 | 6 | 12.5 | 5 | 2.5 | - |