Aluminium Certificates

 

Table with certificates:

 

EN 10204 Reference

Designation of the document type Document content Document validated by
 Type 2.1 Declaration of compliance wih the order Statement of compliance with the order The manufacturer
Type 2.2 Test report Statement of compliance with the order, with indication of results of non-specific inspection The manufacturer
 Type 3.1 Inspection certificate 3.1 Statement of compliance with the order, with indication of results of specific inspection The manufacturer´s authorized inspection representative independent of the manufacturing department 
Type 3.2 Inspection certificate 3.2 Statement of compliance with the order, with indication of results of specific inspection The manufacturer´s authorized inspection representative independent of the manufacturing department and either the purchaser´s authorized inspection representative or the inspector designated by the official regulations

Example of a certificate:


Down below an example of a certificate issued for customer regarding aluminium flat bar 80 x 10 mm:

 

#1. Certificate issued  31.10.2009 according to  EN 10204. Certificate type 3.1

#2. Information about  product, dimension, alloy, temper.

#3. Information about product´s alloy composition

#4. Mechanical results